Muratec MFX-2830 - Manual (Page 322)

FAX
Chapter2
FAX Chapter2 ● Advanced Fax Features
3-144
Entering speed-dials (Mode 1)
In Mode 1, you must add the PIN to the speed-dial number. Transmission is not possible if a PIN
number has not been entered. If Mode 2 has been set, the following entry is not necessary.
1
Create or change an entry using
the one-touch key or speed-dial.
Select the line item you want to edit.
Select [Enter] to continue.
Enter
002:New York Office
Fax No. :2222-2222
PIN :
Name :New York Office
Group No:01,02,03
2
While setting up, the machine
asks you to enter the PIN. Select
[PIN] and press [Enter].
Enter PIN
Enter
002:New York Office
Fax No. :2222-2222
PIN :
Name :New York Office
Group No:01,02,03
Enter Cancel PIN
12345678_
Clear
3
Use the numeric keypad to en-
ter the desired PIN, up to eight
characters in length.
4
Press [Enter] to save the PIN.
5
Press [Enter] to save the speed-
dial setting.
See page 3-162, if neces-
sary.
Note
· If you press [Enter]
without entering the
PIN, the machine beeps,
displaying “PIN is not
stored” on the touch
screen, and then returns
to step 2.
· Press RESET to return to
the standby screen.
Note