Muratec MFX-2830 - Manual (Page 436)

In This
Case...
In This Case... ● Maintenance and Troubleshooting
5-16
5
Tap the new toner bottle on a
table or other hard surface four
or five times for each direction.
6
Vigorously shake the new toner
bottle up and down five times.
Toner hopper
Seal
7
With the seal on the toner bottle
facing up, set it in the toner hop-
per.
Seal
Toner
holder
8
Tilt it down until the toner
holder locks. Grab the seal on the
toner bottle and slowly pull it out
towards you.
· The toner inside the
toner bottle may solidify
sometimes, so it must be
always broken up before
use.
· Tapping the bottle too
hard may cause damage
to the table.
Note