Muratec MFX-2830 - Manual (Page 41)

1-23
Getting Started
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
Touch Screen Display
Key displays and functions
■ Setting key
To set a function, press this key to open the setting screen. Some keys will display the setting value after the
function has been set. When another setting is required to be set first or when the function cannot be combined
with another function, it will be displayed in grey and cannot be selected. Also, when a function setting key is se-
lected, the key colors will be displayed in reverse.
The contents of the setting key (Soft Key) displayed in the standby screen can be changed. (see page 4-10)
Reference
Doc.Type
Auto
Setting
<When key cannot be selected>
Combine
OFF
<Before selection> <After selection>
Photo Photo
■ Cursor keys
These keys are used when entering numbers or selecting functions. They are also used when changing screens.
<Number Entry> <Screen Change>
1/2
0.1"
■
[Cancel], [Enter]
[Cancel] cancels the function or number specified on the screen and closes that screen.
[Enter] sets the function or number specified on the screen and closes that screen.
Enter Cancel