Muratec MFX-2830 - Manual (Page 52)

1-34
Getting
Started
Getting Started
How to load paper into bypass tray by paper type
■ For plain paper
Extension tray
Bypass
tray
1
Open the bypass tray.
Extension
tray
● When loading paper that is larger
than the bypass tray, open the ex-
tension tray.
Guide plate
2
Align the guide plate to the pa-
per size and load the paper by
inserting its edge all the way to
the back.
· Load the paper so that it
does not go higher than
the ▼ mark. (Up to Ap-
prox. 150 sheets)
· Align the guide plate
firmly against the edge
of the paper.
Note Note
When loading anything other than plain paper, the paper type must be set. (see page 1-38)
Reference