Muratec MFX-2830 - Manual (Page 183)

FAX Chapter1 ● Basic Fax Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-5
Before Transmitting
Transmission method settings (Memory transmission/Real time transmission)
There are two types of automatic transmissions. Memory transmission is when a transmission be-
gins after the document is scanned, and real time transmission when a transmission begins while the
document is being scanned. Memory transmission is set at the time of purchase, but when Memory
transmission is set to OFF, one transmission can be specified for real time transmission.
● Real time transmission
Real time transmission directly transmits the document to the other faxmachine without scan-
ning the document into memory. Transmission begins immediately after the transmission opera-
tion is completed to allow you to confirm that the other machine has received the transmission.
● Memory transmission
Memory transmission transmits the document after scanning the document into memory. This
allows you to take the document and leave without waiting for the transmission to end to save
time. For Memory transmission, when the image is corrupted by line trouble, etc., the affected
page is automatically resent.
1
Press FAX .
2
Press [Others].
3
(1) Press [ ] or [ ].
Fax Functions
Select item to edit.
2/2 Enter
F-Code Tx
OFF
DuplexScan
OFF
OverseasTx
OFF
Auto Rx
ON
Dialing
Options
Memory Tx
ON
(2) Press [Memory Tx].
Fax Functions
Select ON/OFF and select [Enter].
2/2 Enter
F-Code Tx
OFF
DuplexScan
OFF
OverseasTx
OFF
Auto Rx
ON
Dialing
Options
Memory Tx
ON
OFF ON
Enter Cancel Memory Tx
4
(1) Press [ON] or [OFF].
(2) Press [Enter].
5
(1) Press [Enter] again to return
to the standby screen.
(2) Set the document and perform
the transmission operation.
Transmitting from the document glass will cause the memory to overflow.
Real time transmission is not possible from the document glass. Even if real time transmission is set, the machine will
automatically switch to Memory transmission. The memory may overflow depending on the document. In this case,
copy the document and send it by real time transmission using the ADF.
In this case
ON ..... Memory Tx
OFF ... Real time Tx
Note
Press RESET to cancel the
settings.
Note