Muratec MFX-2830 - Manual (Page 95)

COPY Chapter1 ● Basic Copy Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
2-15
Selecting the Paper and Copy
Bypass copy
Bypass copy is available with the bypass tray.
For loading paper in the bypass tray, refer to page 1-32.
Reference
1
Load the document.
Extension tray
Bypass tray
2
Open the bypass tray.
Guide plate
3
Align the guide plate to the pa-
per size. Place the printing sur-
face downward, and load the pa-
per by inserting its edge all the
way to the back.
LTR
LTR
LGL
11x17
Copy Ready 001
Set
DuplexCopy
OFF
Contrast
Auto
Doc.Type
Auto
Zoom
100%
Finishing
No Sort
Others
Memory 100%
Paper loaded in the bypass
4
The bypass tray is automatically
selected when paper has been
loaded into it.
5
Press START to begin copying.
Be sure to place the print-
ing surface downward.
Note
When loading paper that
is larger than the bypass
tray, open the extension
tray.
Note
Press RESET to cancel the
settings.
Note