Copy, Part names and functions – Muratec MFX-2830 User Manual
Page 31
1-13
Getting Started
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
Part Names and Functions
No.
Name
Function
1
Automatic Document Feeder
(ADF)
This scans multi-page documents one page at a time. For a duplex docu-
ment, the document’s front and back are each scanned once. Hereinafter
this is stated as “ADF” in this manual.
2
2-Cassette Cabinet
This is a two-level paper cassette. Each paper cassette holds up to 500
sheets of paper.
3
1-Cassette Cabinet
This is a one-level paper cassette. It holds up to 500 sheets of paper. The
second shelf is a drawer that allows paper to be added while the machine is
operating.
4
Large Capacity Cassette
This is a large capacity paper supply cassette that can hold a maximum of
2,500 sheets.
5
Cabinet
This cabinet was developed to make the machine easier to use. There is
space for storing paper and consumables.
6
Duplex Unit
Equipping the machine with this unit makes double-sided printing possible.
7
Switchback Unit
This is used to reverse or sort the paper. It is required when the machine is
equipped with the duplex unit or the 2-Bin tray..
8
2-Bin Tray
This sorts the output paper into different trays when copying, faxing, etc.
9
Handset
Used for voice communication.
10
32MB Memory Expansion Kit
This increases the memory capacity of the machine.
11
Second phone line module
This is used to increase the number of communication lines to perform
Super G3 transmission to two places simultaneously.
12
Printer Kit (OP-500)
This allows the machine to be used as a fine image printer by application
software that supports Windows.
13
Network Printer Kit (NP-500)
This connects the machine to a network to allow it to be used as a network
printer.
14
OfficeBridge Pro (OB-500)
This is an all-in-one package that combines a variety of functions, such as
PC-FAX, internet fax, network printing and network scanning.
15
Finisher
This is used to sort multiple copies into their respective stacks where they
can be stapled together, etc.
16
Punch Kit
Equipping the Finisher with this makes it possible to punch holes in the
copies.
*1 to 5 are component parts, provided as a set at the time of purchase. 6 to 18 are optional parts.