Muratec MFX-2830 - Manual (Page 177)

COPY Chapter3 ● Advanced Copy Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
2-97
Copy Functions Settings
Printing copy settings list
This prints a list showing the settings status of the copy settings.
1
Press LIST .
Enter
Group
Journal
List
Settings
List
List
Select item to edit.
Other
Lists
Speed Dial
2
Press [Settings List].
Other settings list
Function Description Setting
Separator line width The width of the printed separator line can be set
when setting the separator line for combine copy or
repeat. 0.01 " to 0.05 " : 0.01 "
Last job hold time This sets the length of time for which the previously
copied job is stored in memory. Setting the setting to
0 minute will prevent a document from being stored
in memory and prohibit this feature. 0 to 600 min: 0 min
Scan compression mode The scanned image can be compressed and stored
in memory. More document sheets can be stored in
memory by setting the image compression mode to
HIGH. (This slows down the scan speed.) NORMAL, HIGH
Copy reservation The next document can be scanned while the current
document is being copied. Setting this to [OFF] will
prohibit scanning of the next document. ON, OFF
*Underlined items are initial settings at shipment.