Muratec MFX-2830 - Manual (Page 98)

COPY
Chapter1
COPY Chapter1 ● Basic Copy Features
2-18
Zoom by specifying magnification (Set magnification)
Select from the previously set magnifications and perform zoom copying.
● Depending on the selected magnification, the image could run off the paper or there could be extra blank
areas of paper.
● The paper is automatically selected depending on the set magnification. To select the paper, press the
touch screen to select the paper.
● Cassettes containing paper other than 11"×17", Legal, Letter, Letter , or Half-letter, Half-letter can-
not be selected even if the paper setting has been set to “Auto”. From the touch screen, select the cas-
sette containing the paper you want to use for coping.
Operating tips
1
Load the document.
2
When the paper setting is not set
to [Auto], use the following pro-
cedure to set it to [Auto].
(1) Select [Others].
Enter
Margin
OFF
Last job
Combine
OFF
Repeat
OFF
SeriesCopy
OFF
TopUp Copy
OFF
EraseBordr
OFF
EraseCentr
OFF
Card Copy
OFF
XY Zoom
OFF
Nega/Posi
OFF
Copy Functions
Select item to edit.
Paper
Auto
(2) Select [Paper].
Select the paper source and select [Enter].
Enter
Copy
Function
User
Install
Copy Functions
Paper
LTR
LTR
LGL
11x17
Auto
Cancel Enter
(3) Press [Auto].
(4) Press [Enter] twice.
At the default setting,
the paper setting is set to
[Auto].
Note
How to load document
(see page 1-42)
Reference