Muratec MFX-2830 - Manual (Page 83)

COPY Chapter1 ● Basic Copy Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
2-3
Before Copying
■ When the size is automatically detected, but matching paper is not loaded into the cas-
settes
The following message will be displayed when the machine cannot locate appropriate paper.
LTR
LTR
LGL
11x17
DuplexCopy
OFF
Contrast
Auto
Doc.Type
Auto
Zoom
100%
Finishing
No Sort
Others
001
Set
Copy Ready
Memory 99%
Paper size is unsuitable.
Copying with autoselected paper.
Copy continue? (Letter /100%)
Yes No
· Press [Yes] or START to copy onto the selected paper.
Depending on the paper, the image could run off the paper or there could be extra blank areas on the paper.
Note
· Press [No] or RESET to cancel the operation and return to the standby screen.
Change the copy magnification, and restart the operation.
Note
For details of other errors, refer to page 5-24.
Reference