Muratec MFX-2830 - Manual (Page 289)

FAX Chapter2 ● Advanced Fax Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-111
Performing F-Code Communications
TTI type
· Not set:
The TTI of this machine
is not added to the dis-
tributed documents.
· Both:
The TTI of this machine
is added to distributed
documents in addition to
the TTI of the relay box.
· Overwrite:
The TTI of this machine
is added to the distrib-
uted documents. (The
TTI of this machine
overwrites the TTI of
the relay box.)
Note
■ Setting the sender name (TTI Type)
Sub-Address:345345345
Relay Box
Select item to edit.
Enter 1/2
Auto Print :OFF
Box Name :London Office
Password :123456789
TTI Type :Not set
(1) Press [TTI Type].
Sub-Address:345345345
Relay Box
Select item to edit.
Enter 1/2
Auto Print :OFF
Box Name :London Office
Password :123456789
TTI Type :Not set
Enter Cancel TTI Type
Not set Both Overwrite
(2) Select the desired method,
then press [Enter].
■ Setting auto print
Sub-Address:345345345
Relay Box
Select item to edit.
Enter 1/2
Box Name :London Office
Password :123456789
TTI Type :Both
Auto Print :OFF
(1) Press [Auto Print].
Sub-Address:345345345
Relay Box
Select ON/OFF and select [Enter].
Enter 1/2
Box Name :London Office
Password :123456789
TTI Type :Both
Auto Print :OFF
Enter Cancel Auto Print
OFF ON
(2) Select either [ON] or [OFF],
then press [Enter].
If [ON] has been selected
for auto print, documents
sent from the relay box
are also printed out on
this machine.
Note