Muratec MFX-2830 - Manual (Page 309)

FAX Chapter2 ● Advanced Fax Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-131
Scanning and Sending Duplex Documents
OverseasTx
OFF
Dialing
Options
Enter 2/2
Fax Functions
Select the bound originals binding
position and select [Enter].
Auto Rx
ON
Memory Tx
ON
F-Code Tx
OFF
DuplexScan
OFF
Enter Cancel Bind Position
OFF Right&Left Top
4
(1) Select the method for the doc-
ument to be sent.
(2) Press [Enter].
5
Duplex scanning is now set.
Press [Enter] again.
Fax Ready Mode
1/2
Numeric
List
Index
All AB
Atlanta
Office
New York
Office
Los Angels
Office
Chicago
Office
Houston
Office
Seattle
Office
London
Office
Paris
Office
Hong Kong
Office
Tokyo
Office
Domestic
Sales Dep
Overseas
Sales Dep
Contrast
Normal
Resolution
Normal
Monitor
Tx Report
OFF
Others
Fax Ready
Sep 24 2004 01:30pm Memory 99%
Press [Location] to check/delete a location
Broadcast
ON
Location
6
Specify the location.
If the location was set using the
one-touch keys or the Address
Book, the duplex document will
be scanned and transmission
started.
If location were specified using
the numeric keypad, speed-dials
or broadcast, proceed to step 7.
7
Press START .
The document will be scanned
and sent.
Methods for specifying
the location are as fol-
lows:
· Specify using the nu-
meric keypad (see page
3-8)
· Specify using the one-
touch keys (see page
3-10)
· Specify using speed-dial
(see page 3-10)
· Specify using the Ad-
dress Book (see page
3-12)
· When specifying multi-
ple locations, use Broad-
cast Tx (see page 3-58)
or Group Tx. (see page
3-61)
· Set the resolution and
contrast as necessary.
(see page 3-4)
Reference
For details of canceling
the transmission, refer to
page 3-28.
Reference