Muratec MFX-2830 - Manual (Page 465)

Appendix
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
a3
Main Specifications
Fax-Related
Item Specifications
Scanline density Scanner
Scanner ultra-high resolution mode : Main scan 600 dpi × sub scan 600 dpi,
or main scan 16 dots/mm × sub scan 15.4 lines/mm *1
High density mode : Main scan 8 dots/mm × sub scan 7.7 lines/mm *1
Standard mode : Main scan 8 dots/mm × sub scan 3.85 lines/mm *1
Printer : Main scan 16 dots/mm × sub scan 15.4 lines/mm
Data transmission
speed 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400
bps (Automatic selection)
Optimum line Input phone line
Electronic transmis-
sion speed Between 2 and 3 seconds (33600bps) *2
Encoding Method MH/MR/MMR/JBIG/MSE (Independent)
*1 Communication with machines not equipped with this mode is not available.
*2 Based on transmission of ITU-T Test Document 1 to a Muratec fax machine. Your transmission times will vary, but your fax
machine always will provide the fastest transmission speeds possible under ITU-T guidelines and phone-line conditions.
Copy-Related
Item Specifications
Scanline density Scanner: 600 × 600 (dots/inch)
Printer: 600 × 600 (dots/inch)
Warm-up time *1 Max. 15 seconds (in low power mode)/max 17 seconds
Fist copy time *2 5.0 seconds
Continuous copying
speed
*2
28 pages per minute
Continuous copy 1 - 999 copies
*1 Room temperature: 73.4°F (23°C)
*2 Letter , using first level cassette
Option-related
2-level paper unit
Item Specifications
Paper Size Letter, Letter , Legal, 11 " ×17 " , Half-letter, F4, Executive, Executive , A3, B4, A4, A4 , B5, B5
Paper storage capacity 500 sheets (64 g/m 2 × 2 levels)
Power Supplied from main unit
Power consumption 15 W or lower
Weight Approx. 27.3 Kg (59.5 lb)
Machine dimensions W22.5 × H21.5 × D10.4 inches (W570 × H548 × D263 mm)