Muratec MFX-2830 - Manual (Page 25)

1-7
Getting Started
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
Before using your Muratec machine
Where to set up your machine
Follow these guidelines when setting up your machine:
50-95 F
Line jack
Space around the machine
To ensure proper ventilation and easy operation, set up the
machine in an area that meets the minimum requirements for
clearance as illustrated below.
3.9 inches
(10 cm)
3.9 inches
(10 cm)
19.5 inches
(50 cm)
13.8 inches
(35 cm)
15.7 inches
(40 cm)
Near a phone jack
Your machine uses a standard (modular) phone jack, also known as an
RJ-11.
Clean
Dust buildup can damage your machine.
Periodically clean your machine as described in the operating instruc-
tions. Do not use a dust cover, which can cause severe overheating.
Away from a television or radio
Many appliances and office equipment, including televisions, radios,
copy machines, air conditioners and computers, can generate electronic
noise that can interfere with the operation of your machine.
Avoid extreme high/low temperature
Use your machine within the temperature range of 50ºF to 95ºF (10ºC
to 35ºC).
Level, and vibration-free
To avoid an injury or damage to the machine, set the machine up in a
level, vibration-free location.
Away from direct sunlight
To avoid overheating, set up your machine away from direct sunlight
or a heater.
Getting Started