Muratec MFX-2830 - Manual (Page 299)

FAX Chapter2 ● Advanced Fax Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-121
Performing F-Code Communications
Enter
Store
Select item to edit.
Select [Enter] to continue.
Polling
Doc.
Bulletin
Box Doc.
5
Press [Bulletin Box Doc.].
02:New York Office
03:London Office
Bulletin Box Doc.
Select a bulletin box.
Select [Enter] to continue.
Enter 1/4
01:Atlanta Office
05:
04:
06:
6
Select the F-code box in which
you want to store the document.
02:New York Office
03:London Office
Bulletin Box Doc.
Enter I.D.Code
Enter 1/4
01:Atlanta Office
05:
04:
06:
Clear
Enter I.D.Code
_
7
Use the numeric keypad to enter
the I.D. code (4 digits) if it has
been set.
Enter
Bulletin Box Doc.
Select document storage method
Add Over Write
Over-write:Replace a box document
Add :Add a box document.
8
Select how the document is to be
stored.
Enter
Bulletin Box Doc.
Select document storage method
Add Over Write
Over-write:Replace the box's document
Add:Add to the box's document.
Yes No
Over Write
Store document?
9
Press [Yes].
Scanning of the document will
now start.
Here we overwrite the document.
Proceed to step 8 if an I.D.
code has not been set.
Note
When there are already
30 documents stored in
the box, “Too many loca-
tion” is displayed.
Note
· Over Write
Overwrites documents
in the box.
· Add
Adds the document in
the box.
· Press RESET to return to
the standby screen.
Note