How to load document -42, How to load document – Muratec MFX-2830 User Manual
Page 60
Advertising
1-42
Getting
Started
Getting Started
How to load document
Make sure to dry correction fluid, ink and stamped areas completely before loading the document.
◆
When loading the document in the ADF
(1) Place the surface to be copied or transmitted upward and load it all the way to the back on the left side of
the machine. (The loaded document will be copied or transmitted from the top of the stack.)
(2) Align the document guide with the document width.
(3) Carefully adjust it until it touches the edge of the document.
Face the surface of the document to be
copied or transmitted upward.
Advertising