Muratec MFX-2830 - Manual (Page 301)

FAX Chapter2 ● Advanced Fax Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-123
Performing F-Code Communications
Enter
Batch Tx
Doc.
Print
Select item to edit.
Sucurity
Rx Doc
Command
Doc.
Polling
Doc.
F-Code
Doc.
4
Press [F-Code Doc.].
01:Atlanta Office
02:New York Office
03:London Office
04:
05:
F-Code Doc.
Enter
06:
1/4
5
Select the F-code box in which
the documents you want to print
out are stored.
01:Atlanta Office
02:New York Office
03:London Office
04:
05:
F-Code Doc.
Enter
06:
1/4
Enter I.D.Code
Clear
Enter I.D.Code
_
6
Use the numeric keypad to enter
the I.D. code (4 digits) if it has
been set.
All stored documents.
01:Already stored.
02:Not registered.
03:Not registered.
04:Not registered.
F-Code Doc.
Enter
05:Not registered.
1/6
7
Select the applicable file number.
For security box reception, the
procedure finishes at step 7.
All stored documents.
01:Already stored.
02:Not registered.
03:Not registered.
04:Not registered.
F-Code Doc.
Enter
05:Not registered.
1/6
Yes No
01:Already stored.
Would you like to print?
8
Press [Yes].
Stored or received documents
will now print out.
If an I.D. code has not
been set, proceed to step
7.
Note
Select “All stored docu-
ments.” to print out all
documents stored in this
F-code box.
Note
· Security reception docu-
ments are automatically
deleted when printed
out.
· Documents received or
stored in bulletin boxes
are not deleted even if
they are printed out.
Note