Muratec MFX-2830 User Manual
Page 433
In This Case...
●
Maintenance and Troubleshooting
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
5-13
Document Jams
(1)
3
(1) Turn the dial to discharge the
jammed document.
(2)
(1)
(2) Lift up the document tray.
(3) Gently pull out the jammed
document.
4
Lower the document tray. Close
the inside cover and the ADF
cover.
Document jam
Document jam
Open & Check the
Blinking Cover.
Continue to store?
Yes
No
Document jam
Document jam
5
(1) When the error message
shown at right is displayed,
the remaining pages of the
document can continue to be
scanned.
(2) Press [Yes] to continue scan-
ning.
Continue storing..
Start
Cancel
Set the document,
Press [START]
From Page : 2
Jam Recover
6
Replace the jammed document
and press [Start] or
START
.
Scanning of the document will
start.
If you are using Quick
Memory Transmission,
a check message will
be printed indicating
the number of pages in
the document that got
j a m m e d . R e p l a c e t h e
jammed document and
resend it.
Note
In transmitting, press
[No] to stop transmis-
sion. In copying, press
[No] to start copying only
the scanned document.
Note