Muratec MFX-2830 - Manual (Page 155)

COPY Chapter2 ● Advanced Copy Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
2-75
Duplex Copying
■ Setting the magnification
The magnification is automatically set. Change the magnification ratio using the fol-
lowing steps.
Enter CopyMethod
Book(Face) Ratio
Auto
DuplexCopy
1
1 2 2 2
Doc. Direction
Select [Enter] to save the setting. Select
[CopyMethod] and [OFF] to cancel the function
Doc. Bind
Left
5
(1) Press [Ratio] to change the
copy magnification.
Enter CopyMethod
Book(Face) Ratio
Auto
DuplexCopy
1
2 1 2 2
Doc. Direction
Use the arrows or numeric keypad to
select the zoom ratio and select [Enter].
Doc. Bind
Left
Zoom
Enlarge
77%
Legal->
Letter
121%
Legal->
11x17
100%
+
-
25~400
Cancel
129%
Enter
129%
Letter->
11x17 154%
H.LTR->
Legal
Reduce
64%
11x17->
Letter 50%
11x17->
H.LTR
Auto
(2) Select the magnification with
which you want to copy or use
[+] [-] or the numeric keypad
to set the magnification.
(3) Press [Enter].
LTR
LTR
LGL
11x17
DuplexCopy
Book(Face)
Contrast
Auto
Doc.Type
Auto
Zoom
129%
Finishing
Sort
Memory 100%
Copy Ready 001
Set
Others
6
Press [Enter] to return to the
standby screen.
7
Place the document on the docu-
ment glass and press START .
Press RESET to cancel the
duplex copy settings.
Note
The ADF cannot be used.
Note
Next documents can be
set to scan multiple docu-
ments. (see page 2-9)
Reference
· If you make an incorrect
entry, overwrite it with
the correct entry.
· The magnification can
be set from 25% to 400%.
Note