Muratec MFX-2830 - Manual (Page 371)

FAX Chapter4 ● Fax Settings
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-193
Transmission Default Settings
Enter
Default Settings
Adjust the resolution and select [Enter].
Contrast
Normal
Memory Tx
ON
TTI
ON
Tx Report
OFF
Enter Cancel Resolution
Normal Fine S-Fine
Photo Background
5
(1) Press the value (in this ex-
ample, the level of resolution)
you want to set as the default.
(2) Press [Enter].
Enter
Resolution
Fine
Contrast
Normal
Memory Tx
ON
Default Settings
sSelect item to edit.
TTI
ON
Tx Report
OFF
Cover Page
OFF
6
The default for resolution is set.
You can continue on from here
and set other defaults as well. Press RESET to return to
the standby screen.
Note
Transmission default settings list
Function Description Setting
Resolution
This sets the default level for resolution when a document is scanned. By setting
it to a level suitable for the most commonly sent document type, you can reduce
the time and effort required when making changes. Normal
Fine
S-Fine
Photo
Background
Contrast
This sets the default level for contrast when a document is scanned. By setting
it to a level suitable for the most commonly sent document type, you can reduce
the time and effort required when making changes. Lightest
Lighter
Normal
Darker
Darkest
TTI
Set to “ON” to display or print the sender’s name on faxes. ON
OFF
Memory transmis-
sion
(see page 3-5)
This sets whether to give the priority to memory transmission or to real-time
transmissions when sending faxes. Memory transmissions are prioritized when
“ON” is set and real-time transmissions when “OFF” is set.
You can also select to give the priority to memory transmissions or to real-time
transmissions each time you send a fax. ON
OFF
Cover page
(see page 3-76) Set to “ON” to add a cover page containing a simple message to every fax. ON
OFF
Tx report
(see page 3-154) Set to “ON” to print out a transmission report for each fax.
You can also select ON or OFF for each fax communication. ON
OFF
Underlined items are the factory default.
Factory defaults are the settings established at the time of shipment.
Note