Clcc parameters -41 – PIONEERPOS AT Commands G24-LC User Manual

Page 105

Advertising
background image

Chapter 3: AT Commands Reference

April 15, 2008

G24-L AT Commands Reference Manual

3-41

The following table shows the +CLCC parameters.

Note:

When a mobile-originated call is routed to PSTN (PABX), no ALERT indication is
prompted.

Example

AT+CLCC=?

+CLCC: (0,1)

OK

AT+CLCC

+CLCC: 1,0,0,0,0,"01256316830",129,"Shmuel"

OK

AT+CLCC?

Table 3-19: +CLCC Parameters

<Parameter>

Description

<state>

0

Disable CLCC unsolicited indication

1

Enable CLCC unsolicited indication

The default value is 0.

<idx>

Integer type, call identification number

<dir>

0

Mobile originated call (MO)

1

Mobile terminated call (MT)

<call state>

The state of the call
0

Active

1

Held

2

Dialing (MO call)

3

Alerting (MO call)

4

Incoming (MT call)

5

Waiting (MT call)

6

Released

<mode>

Bearer/Teleservice
0

Voice Call

1

Data

2

Fax

<mpty>

Multiparty status
0

Call is not part of a multiparty call

1

Call is one of multiparty call parties

<number>

Phone number in the format specified by <type>.
Contains a string of up to 32 characters.

<type>

Phone number display format.
Type of address octet in integer format (refer to GSM 04.08 [8] subclause 10.5.4.7)
129

Local number

145

International number with access character +

<alpha>

Text representation of the phone book entry.
String type alphanumeric representation of <number> corresponding to the entry
found in the phone book.
Contains a string of up to 20 characters.

Advertising
This manual is related to the following products: