PIONEERPOS AT Commands G24-LC - Manual (Page 289)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-225
+CMER, Mobile Equipment Event Reporting
The following table shows the +CMER parameters.
+CLAN, ME Language
This command handles the selection of language in the ME.
Command
Type Syntax Response/Action Remarks
Set +CMER=[<mode>
[,<keyp>[,<disp>
[,<ind>[,<bfr>]]]]]
OK
or:
+CME ERROR: <err>
The Set command
enables/disables an external
accessory to receive event
reports from the G24-L. In
some cases, this is used to
track the user activity for
redisplay on a vehicle system,
or to perform accessory-spe-
cific menu operations.
Read +CMER? +CMER:
<mode>,<keyp>,<disp>,<ind>,<bfr>
OK
or:
+CME ERROR: <err>
The Read command queries
the current settings for the
AT+CMER command.
Test +CMER=? +CMER: (list of supported
<mode>s),(list of supported
<keyp>s),(list of supported
<disp>s),(list of supported
<ind>s),(list of supported <bfr>s)
The Test command returns
the possible <mode>,
<keyp>, <disp>, <ind>, and
<bfr> values.
Table 3-148: +CMER Parameters
<Parameter> Description
<mode> Controls the processing of unsolicited result codes specified within this command.
0
Buffer unsolicited result codes in G24-L
<keyp> Reserved for future implementation.
<disp> Reserved for future implementation.
<ind> 0 No indicator events reporting.
1 Indicator event +CIEV: <ind>,<value>.
<ind> shows the indicator order number and <value> is new value of indicator.
The default value is 0.
<bfr> Controls the effect on buffered codes.
0
Clear buffer.