PIONEERPOS AT Commands G24-LC - Manual (Page 160)

SMS
3-96 G24-L AT Commands Reference Manual April 15, 2008
Note: Any unused bits will be set to zero and will be ignored by the receiving entity.
<pages> Total number of pages
<mr> Message Reference
<ra> Message Recipient address
<tora> Type of Recipient address
<scts> Service center time stamp
<dt> Discharge-Time
<st> Status
Table 3-56: Layout of SMS-DELIVER in PDU Mode (according to GSM03.40)
Reference Description Length
<sca> Service Center address:
1 BYTE: length (number of followed
octets).
Mandatory
1 BYTE: <tosca> - value between
128-255 1, 3-12 BYTES
(When length is 1, length BYTE = 0 )
<fo> First Octet. See Table 3-57 . 1 BYTE
<TP-OA> Originating address formatted according
to the formatting rules of address fields. 2-12 BYTES
<TP-PID> Protocol-Identifier. Values between
0-255. 1 BYTE
<TP-DCS> Data Coding Scheme. Values between
0-255. 1 BYTE
<TP-SCTS> The TP-Service-Center-Time-Stamp field
is given in semi-octet representation, and
represents the local time as described in
GSM03.40 7 BYTE
<TP-UDL> User data length 1 BYTE
<TP-UD> User data 0-140 BYTES
Table 3-55: +CMGR/+MMGR Parameters (Cont.)
<Parameter> Description