PIONEERPOS AT Commands G24-LC - Manual (Page 96)

Call Control
3-32 G24-L AT Commands Reference Manual April 15, 2008
The following table shows the +CBST parameters.
Example
AT+CBST=?
+CBST: (000,004,006,007,014,068,070,071,075),(000-001),(000-003)
OK
AT+CBST?
+CBST: 007,000,001
OK
AT+CBST=6
OK
AT+CBST?
+CBST: 006,000,001
OK
Read AT+CBST? +CBST:
<speed>,<name>,<ce>
OK
Test AT+CBST=? +CBST: (list of
supported
<speed>s),(list of
supported
<name>s),(list of
supported <ce>s)
OK
The Test command returns values
supported by the MA as compound
values.
Table 3-14: +CBST Parameters
<Parameter> Description
<speed> 0 - Auto-bauding (automatic selection of the speed; this setting is possible in case of
3.1 kHz modem and non-transparent service)
6 - 4800 bps (V.32)
7 - 9600 bps (V.32)
14 - 14400 bps (V.34)
68 - 2400 bps (V.110 or X.31 flag stuffing)
70 - 4800 bps (V.110 or X.31 flag stuffing)
71 - 9600 bps (V.110 or X.31 flag stuffing)
75 - 14400 bps (V.110 or X.31 flag stuffing)
The default value is 7.
Note: Currently the G24-L supports:
2 baud rates: 4800 and 9600 bps
2 protocols: V.110 and V.32
<name> 0 - Data circuit asynchronous (UDI or 3.1 kHz modem)
1 - Data circuit synchronous (UDI or 3.1 kHz modem)
The default value is 0.
<ce> 0 - Transparent (Reserved for future implementation)
1 - Non-transparent (default)
Command
Type
Syntax Response/Action Remarks