PIONEERPOS AT Commands G24-LC - Manual (Page 408)

AT Commands Alphabetical Summary
A-6 G24-L AT Commands Reference Manual April 15, 2008
+CLCC This command returns a list of all
current G24-L calls and their
statuses, and also
enables/disables the unsolicited
indication of the call list. Page 3-40
+CLCK This command locks, unlocks or
interrogates a G24-L or a
network facility <fac>. Page 3-184
+CLIP This command controls the
Calling Line Identity (CLI)
presentation to the terminal when
there is an incoming call. Page 3-19
+CLIR This command enables/disables
the sending of caller ID
information to the called party,
for an outgoing call. Page 3-29
+CLVL This command sets the volume of
the internal loudspeaker (which
also affects the key feedback
tone) of the G24-L. Page 3-159
+CMEE This command enables/disables
the use of result code +CME
ERROR: <err> as an indication
of an error relating to the
functionality of the G24-L. Page 3-206
+CMER This command enables an
external accessory to receive key
press information from the G24’s
internal keypad. Page 3-225
+CMGD This command deletes messages
from the G24-L memory. Page 3-108
+CMGF This command handles the
selection of message formats. Page 3-77
+CMGL This command displays a list of
SMS messages stored in the
G24-L memory. Page 3-89
+CMGR This command enables the user
to read selected SMS messages
from the G24-L memory. Page 3-94
+CMGS This command sends an SM from
the G24-L to the network. Page 3-110
+CMGW This command writes and saves
messages in the G24-L memory. Page 3-103
+CMSS This command selects and sends
pre-stored messages from the
message storage. Page 3-101
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page