PIONEERPOS AT Commands G24-LC - Manual (Page 417)

Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-15
+VTS This command transmits DTMF
tones when a voice call is active. Page 3-176
A This command answers an
incoming call, placing the G24-L
into the appropriate mode, as
indicated by the RING message. Page 3-17
A/ This command repeats the last
command entered on the
terminal. Page 3-177
AT This command checks the AT
communication and only returns
OK. Page 3-177
D This command places a voice call
on the current network, when
issued from an accessory device. Page 3-11
D*99 This command enables the ME to
perform the actions necessary for
establishing communication
between the terminal and the
external PDN. Page 3-242
D> This command places a
voice/fax/data call on the current
network by dialing directly from
the G24-L phone book. Page 3-12
DL This command places a voice call
to the last number dialed. Page 3-14
E This command defines whether
the G24-L echoes the characters
received from the user, (whether
input characters are echoed to
output). Page 3-192
F This command is supported for
backward compatibility only, and
has no effect. Page 3-304
H This command hangs up, or
terminates a particular call. Page 3-15
I This command requests various
G24-L information items. Page 3-6
L This command is supported for
backward compatibility only, and
has no effect. Page 3-304
M This command is supported for
backward compatibility only, and
has no effect. Page 3-304
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page