PIONEERPOS AT Commands G24-LC - Manual (Page 413)

Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-11
+MAVOL This command enables you to
determine a volume setting for a
particular feature in a particular
accessory. Page 3-166
+MBC This command controls the
battery charger process. Page 3-130
+MCSAT This command
enables/disables/exercises SMS
alert tone for an arriving SMS. Page 3-111
+MCSN This command sets EFmsisdn in
the SIM. Page 3-69
+MCST This command displays the
current state of the call
processing, and also
enables/disables the unsolicited
indication of any change in the
call processing state. Page 3-42
+MCWAKE This command requests reports
on the status of the GPRS/GSM
coverage. Page 3-139
+MDC This command enables you to
select the desired messages to be
displayed upon connection of a
voice call with a remote party. Page 3-36
+MDSI This command enables
unsolicited reporting of
indications of SIM deactivation
and invalidation. Page 3-67
+MFS This command is used to
determine how long the G24-L
waits before attempting to
re-register after a registration
attempt has failed and the G24-L
is not registered. Page 3-126
+MGEER This command returns the PDP
context activation reject cause. Page 3-240
+MGGIND This command configures the
service indicator on pin 49 of the
70 pin connector to be GPRS or
GSM. Page 3-140
+MIOC This command defines the
G24-L 8 GPIO pins data
value. Page 3-144
+MIOD This command defines the
G24-L 8 GPIO pins
configuration. Page 3-147
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page