PIONEERPOS AT Commands G24-LC - Manual (Page 156)

SMS
3-92 G24-L AT Commands Reference Manual April 15, 2008
The following table shows the +CGML/+MMGL parameters.
Table 3-54: +CGML/+MMGL Parameters
<Parameter> Description
<index> 1-352 Index of message in storage.
<stat> Status of message in memory:
<oa/da> Original/destination address.
<data> Message contents in text mode.
<length> In PDU mode: Size of message, in octets, excluding SMSC data.
In TEXT mode: Number of characters included in <data>.
<pdu> Message header and contents in PDU mode format. See description in “+CMGR,
+MMGR, Read Message” on page 3-94 .
<toda/toda> Type of origination address / destination address
<fo> First octet of the SM
<mr> Message reference
<ra> Recipient-Address
<tora> Type Of Recipient-Address
<scst> Service center time stamp
<ct> Command type
<sn> Message serial number
<mid> Message ID
<page> Current page number
<pages> Total number of pages
<dt> Discharge-Time
<st> Status
PDU mode Text mode Description
0 “REC UNREAD” Received unread messages (default)
1 “REC READ” Received read messages
2 “STO UNSENT” Stored unsent messages
3 “STO SENT” Stored sent message
4 “ALL” All messages
5 “HEADER ONLY” Header only (applies to +MMGL only)