PIONEERPOS AT Commands G24-LC User Manual
Page 410
AT Commands Alphabetical Summary
A-8
G24-L AT Commands Reference Manual
April 15, 2008
+CPBS
This command selects the
memory that is to be used for
reading and writing entries in
G24s that contain more than one
phone book memory.
+CPBW
This command enables the user
to store a new entry in the phone
book, or delete an existing entry
from the phone book.
+CPIN
This command is only relevant
for phones that use SIM cards. It
unlocks the SIM card when the
proper SIM PIN is provided, and
unblocks the SIM card when the
proper SIM PUK is provided.
+CPMS
This command handles the
selection of the preferred storage
area for messages.
+CPOL
This command is used to edit the
list of preferred operators located
in the SIM card.
+CPUC
This command sets the
parameters of the Advice of
Charge-related price per unit and
currency table found in the SIM
file, EFPUCT.
+CPWD
This command sets a new
password for the facility lock.
+CR
This command controls whether
or not the extended format of an
outgoing call is displayed or not.
+CRC
This command controls whether
to present the extended format of
the incoming call indication.
+CREG
This command enables/disables
the network status registration
unsolicited result code.
+CRING
This unsolicited event indicates
the type of incoming call.
+CRLP
This command returns the Radio
Link Protocol parameters.
+CRSL
This command handles the
selection of the incoming call
ringer and alert tone (SMS)
sound level on the alert speaker
of the G24-L.
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
Description
Page