PIONEERPOS AT Commands G24-LC - Manual (Page 405)

Appendix A: Reference Tables
April 15, 2008 G24-L AT Commands Reference Manual A-3
\G This command sets the use of the
software control. Page 3-197
\J This command adjusts the
terminal auto rate. Page 3-197
\K This command is supported for
backward compatibility only, and
has no effect. Page 3-304
\N This command links the type. Page 3-197
\S This command displays the status
of selected commands and
S-registers. Page 3-197
ATS97 This command indicates whether
an antenna is physically
connected to the G24-L RF
connector. Page 3-143
+CACM This command resets the Advice
of Charge accumulated call meter
value in the SIM file, EFACM. Page 3-46
+CALM This command handles the
selection of the G24’s alert sound
mode. Page 3-171
+CAMM This command sets the Advice of
Charge accumulated call meter
maximum value in the SIM file,
EFACMmax. Page 3-47
+CAOC This command enables the
subscriber to get information
about the cost of calls. Page 3-44
+CBAND This command is supported for
backward compatibility only, and
has no effect. Page 3-197
+CBAUD This command sets the baud rate. Page 3-132
+CBC This command enables a user to
query the battery charger
connection. Page 3-129
+CBST This command selects the bearer
service and the connection
element to be used when data
calls are originated. Page 3-31
+CCFC This command enables control of
the call-forwarding
supplementary service. Page 3-27
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page