PIONEERPOS AT Commands G24-LC User Manual
Page 48
AT Commands Summary
1-18
G24-L AT Commands Reference Manual
April 15, 2008
System Date and Time Access Commands
+CCLK
This command reads/sets the G24-L's current date and time settings.
SMS
SMS Commands
+CSMS
This command handles the selection of the SMS message service
type.
+CPMS
This command handles the selection of the preferred storage area for
messages.
+CMGF
This command handles the selection of message formats.
+CSCA
This command handles the selection of the SCA and the TOSCA.
+CSMP
This command sets the Text Module parameters.
+CSDH
This command shows the Text Mode parameters.
+CNMI
This command sends an unsolicited indication when a new SMS
message is received by the G24-L.
+CNMA
This command acknowledges the receipt of a +CMT response.
+CMTI
This unsolicited message, including the SMS message index, is sent
upon the arrival of an SMS message.
+CMT
This unsolicited message displays the received SMS-DELIVER
message.
+CDSI
This unsolicited message indicates that a new
SMS-STATUS-REPORT message was received, and is stored
in location <index>.
+CDS
This unsolicited message displays the received
SMS-DELIVER message.
+CMGL
This command displays a list of SMS messages stored in the G24-L
memory.
+MMGL
This command displays a list of SMS messages stored in the G24-L
memory.
+CMGR
This command reads selected SMS messages from the G24-L
memory.
+MMGR
This command reads selected SMS messages from the G24-L
memory.
+MMAR
This command changes the status of an SMS message in the G24-L
memory from "REC UNREAD" to "REC READ".
+CMSS
This command selects and sends pre-stored messages from the
message storage.
+CMGW
This command writes and saves messages in the G24-L memory.
+CMGD
This command deletes messages from the G24-L memory.
Table 1-1: AT Commands (Cont.)
AT Command
Description
Page