PIONEERPOS AT Commands G24-LC - Manual (Page 284)

UI (User Interface)
3-220 G24-L AT Commands Reference Manual April 15, 2008
Example
AT+CRSM=176,28478,0,0,20 //READ BINARY, GID1(6F3E),0 ,0 , 20 bytes
+CRSM: 144,0, FFFFFFFFFF //Generic success code, 20 bytes of file data
FFFFFFFFFF00000000000000000000
OK
AT+CRSM=178,28474,1,4,26 //READ RECORD, ADN file(6F3A) data, 1, current, 26 bytes
+CRSM: 144,0,72656EFFFFFFFFFFFFFFFFFF06818984143243FFFFFFFFFFFFFF
//Generic success code, 26 bytes data of the 1st record
OK
AT+CRSM=192,12258 //GET RESPONSE, ICCID(2fe2)
+CRSM: 144,0,0000000A2FE204000B00BB01020000
//Generic success code, 0000-> RFU 000A->File size 2FE2-> File ID
04-> Type of the file (EF) 00->RFU 0B00BB->Access conditions (READ=0-ALW, UPDATE=B-NEVER)
01->File status 02->Length of the following data (byte 14 to the end) 00->Structure of EF (transparent)
00->Length of a record (For cyclic and linear fixed EFs this byte denotes the length of a record. For a
transparent EF, this byte shall be coded '00')
OK
AT+CRSM=214,28498,0,0,8,C69018C7958C87
//UPDATE BINARY, KcGPRS(6F52), 0,0, 8 bytes , data to be write to
the file
<response> Response of a successful completion of the command previously issued (hexadecimal
character uppercase format). STATUS and GET RESPONSE return data, which gives
information about the current elementary data file_id. This information includes the
type of file and its size (refer to GSM 11.11). After READ BINARY or READ
RECORD command the requested data will be returned. <response> is not returned
after a successful UPDATE BINARY or UPDATE RECORD command.
Table 3-144: +CRSM Parameters (Cont.)
<Parameter> Description
<sw1> <sw2> Error Description
152 80 Increase cannot be performed, Max value reached.
103 XX Incorrect parameter P3 (NOTE: 'XX' gives the correct
length or states that no additional information is given
('XX' = '00').
107 XX Incorrect parameter P1 or P2.
109 XX Unknown instruction code given in the command.
110 XX Wrong instruction class given in the command.
111 XX Technical problem with no diagnostic given.