PIONEERPOS AT Commands G24-LC - Manual (Page 406)

AT Commands Alphabetical Summary
A-4 G24-L AT Commands Reference Manual April 15, 2008
+CCLK This command reads/sets the
G24's current date and time
settings. Page 3-73
+CCWA This command controls the Call
Waiting supplementary service,
including settings and querying
of the network by the G24-L. Page 3-21
+CDS Unsolicited Response (New
SMS-STATUS-REPORT
Receipt). Page 3-88
+CDSI Unsolicited Response (New
SMS-STATUS-REPORT
Indication). Page 3-88
+CEER This command returns an
extended error report containing
one or more lines of information
text <report>, determined by the
manufacturer, providing reasons
for errors. The errors are call
clearing codes. Page 3-213
+CFSN This command is used to
query the manufacturing
serial number
.
Page 3-5
+CFUN This command shuts down the
phone functionality of smart
phones and PDAs with phone
capabilities. Page 3-141
+CGACT This command
activates/deactivates the PDP
Context. Page 3-245
+CGATT This command attaches the
G24-L to the GPRS network. Page 3-237
+CGCLASS This command sets the GPRS
mobile station class. Page 3-231
+CGDCONT This command specifies the PDP
(Packet Data Protocol) context. Page 3-232
+CGMI This command requests
manufacturer identification. Page 3-1
+CGMM This command requests the
model identification. Page 3-2
+CGMR This command requests the
revision identification. Page 3-3
+CGPADDR This command reads the
allocated PDP addresses for the
specified context identifiers. Page 3-238
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command Description Page