Mgeer parameters -241 – PIONEERPOS AT Commands G24-LC User Manual
Page 305
Chapter 3: AT Commands Reference
April 15, 2008
G24-L AT Commands Reference Manual
3-241
The following table shows the +MGEER parameters.
Table 3-158: +MGEER Parameters
<Parameter>
Description
<n>
Indicates what format of cause needs to be printed. The default value is 2.
1
Returns numeric cause format.
2
Returns text cause format.
<cause>
The PDP context activation reject cause.
0
Bad SIM (user authentication failed)
1 Roaming
Not
Allowed
2
Access Class Not Allowed
3 Network
Failure
4 Insufficient
Resource
5
All TID In Use
6
Link EST Failed
7
Activation Rejected By Network
8
Lower Layer Failure
9
Activation In Progress
10
Unspecified
11
Reactivation
12
Invalid QOS
13
MT AA Deactivation
14
MAX Timer Expiry
15
"Missing Or Unknown APN"
16
LLC Or SNDCP Failure
17
Feature Not Supported
18
CS Transaction In Progress
19
Primary NSAPI Being Deactivated
20
Primary NSAPI Inactive
21
Semantic Error In TFT Operatio
22
Syntactical Error In TFT Operation
23
Unknown PDP Context
24
Semantic Errors In Packet Filters
25
Syntactical Errors In Packet Filters
26
PDP Context Without TFT Already Activated
27
Feature Not Supported By Network
28
MT Modification In Progress
29
RAB Loss
30
Incompatible QOS Values
31
Activation Rejected Unspecified
32
Service Option Not Supported
33
Service Option Not Subscribed
34
Service Option Temporarily Out Of Order
35
Operator Determined Barring
36
QOS Not Accepted
37
NSAPI Already Used
38
Cause Protocol Error
254
Unspecified
255
No Information Available