PIONEERPOS AT Commands G24-LC - Manual (Page 275)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-211
Example
AT+CMEE=0 //+CME ERROR is not used
OK
AT+VTD
ERROR
AT+CMEE=1 //Use numeric <err>
OK
AT+VTD
+CME ERROR: 1
AT+CMEE=2 //Use verbose <err>
OK
<err>
Continued 301, "SMS service of ME reserved"
302, "operation not allowed"
303, "operation not supported"
304, "invalid PDU mode parameter"
305, "invalid text mode parameter"
310, "SIM not inserted"
311, "SIM PIN required"
312, "PH-SIM PIN required"
313, "SIM failure"
314, "SIM busy"
315, "SIM wrong"
316, "SIM PUK required"
317, "SIM PIN2 required"
318, "SIM PUK2 required"
320, "memory failure"
321, "invalid memory index"
322, "memory full"
330, "SMSC address unknown"
331, "no network service"
332, "network timeout"
340, "no +CNMA acknowledgement expected"
500, "unknown error"
512, "network busy"
513, "invalid destination address"
514, "invalid message body length"
515, "phone is not in service"
516, "invalid preferred memory storage"
517, "user terminated"
Table 3-142: +STK Errors
<Parameter> Description
<err> Numeric format followed by verbose format:
700, "SIM ToolKit not available"
701, "cannot sustain both call and SIM application"
Table 3-141: +CMS Errors (Cont.)
<Parameter> Description