PIONEERPOS AT Commands G24-LC - Manual (Page 53)

Chapter 1: Product Features
April 15, 2008 G24-L AT Commands Reference Manual 1-23
&Y This command displays the default user profile. Page 3-224
+CMER This command enables an external accessory to receive key press
information from the G24-L’s internal keypad. Page 3-225
+CLAN This command handles the selection of language in the ME. Page 3-225
+CIND This command is used to query the status of various ME indicators. Page 3-227
Unsolicited UI Status Messages
+CIEV An unsolicited indication regarding various phone indications that is
sent to the DTE when the <ind> parameter of the +CMER command
is set to 1. Page 3-229
GPRS
GPRS Commands
+CGCLASS This command sets the GPRS mobile station class. Page 3-231
+CGDCONT This command specifies the PDP (Packet Data Protocol) context. Page 3-232
+CGQMIN This command sets the minimum acceptable quality of service
profile. Page 3-234
+CGQREQ This command displays the requested quality of service profile. Page 3-236
+CGATT This command attaches the G24-L to the GPRS network. Page 3-237
+CGPADDR This command reads the allocated PDP addresses for the specified
context identifiers. Page 3-238
+MGEER This command returns the PDP context activation reject cause. Page 3-240
D*99 This command enables the ME to perform the actions necessary for
establishing communication between the terminal and the external
PDN. Page 3-242
+CGPRS This command indicates whether there is GPRS coverage. Page 3-244
+CGACT This command activates/deactivates the PDP Context. Page 3-237
STK Commands
+MTKR This command displays the profile that is downloaded from the
G24-L to the SIM during the SIM initialization process. Page 3-247
+MTKE This command enables/disables the SIM ToolKit functionalities. Page 3-257
+MTKP This is both a command and an unsolicited event. The command
responds to an unsolicited event. Page 3-258
+MTKM This is both a command and an unsolicited event. The command
selects items from the menu. Page 3-272
+MTKC This unsolicited event notifies the terminal when supplementary
services, SMS Control or Call Control are modified. Page 3-274
+MTKA This command sends acknowledge response from the user (TE) to
the STK. Page 3-274
Table 1-1: AT Commands (Cont.)
AT Command Description Page