PIONEERPOS AT Commands G24-LC User Manual
Page 404
AT Commands Alphabetical Summary
A-2
G24-L AT Commands Reference Manual
April 15, 2008
&G
This command is supported for
backward compatibility only, and
has no effect.
&J
This command is supported for
backward compatibility only, and
has no effect.
&K
This command configures the
RTS/CTS flow control.
&L
This command is supported for
backward compatibility only, and
has no effect.
&M
This command is supported for
backward compatibility only, and
has no effect.
&P
This command is supported for
backward compatibility only, and
has no effect.
&Q
This command selects the
asynchronous mode, and has no
effect.
&R
This command is supported for
backward compatibility only, and
has no effect.
&S
This command is supported for
backward compatibility only, and
has no effect.
&T
This command is supported for
backward compatibility only, and
has no effect.
&V
This command displays the
current active configuration and
stored user profiles.
&W
This command stores the user
profile.
&Y
This command displays the
default user profile.
?
This command displays the most
recently updated value stored in
the S-register.
\A
This command is supported for
backward compatibility only, and
has no effect.
\B
This command is supported for
backward compatibility only, and
has no effect.
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
Description
Page