YSI IQ SensorNet 2020 XT Terminal - Manual (Page 146)

Settings/setup System 2020 XT USB
5 - 26 ba76019e01 12/2012
5.9 Settings for a measurement location
Primarily, the settings for a measurement location simplify the
calibration of IQ sensors if several IQ sensors of the same type are
operated on the system. The option of hiding IQ sensors on the
measured value display that are not operated at the measurement
location helps to find IQ sensors at the measurement location quickly.
Measurement location-related settings become effective as soon as a
terminal is docked on an MIQ module. Measurement location-related
settings include:
 the location name (module name)
 the selection of the sensors for the measured value display.
Fig. 5-14 Location display
1 Using <S>, open the Settings menu.
2 Using <
> and <OK>, select and confirm the menu
item, System settings -> Select measured values of location.
The Location display display opens.