YSI IQ SensorNet 2020 XT Terminal - Manual (Page 114)

Operation System 2020 XT USB
4 - 36 ba76019e01 12/2012
The restoration of a configuration onto the main controller is carried out
manually from the USB memory device. A backup of the configuration
onto USB memory device can be carried out in one of the following
ways:
 Regular manual backup to USB memory device
 Regular automatic backup to MIQ/TC 2020 XT (configured as
terminal)
If no current manual backup is present, the automatic backup of the
MIQ/TC 2020 XT can be used.
To transfer the configuration automatically backed up on the MIQ/
TC 2020 XT to a USB memory, operate the MIQ/TC 2020 XT as a
controller or backup controller. In this status the configuration data of
the backup controller can be backed up onto a USB memory as a
manual backup.
Manually restore after
MIQ/TC 2020 XT
controller operation
To transfer configuration data onto the controller, proceed as follows:
1 Using <S>, open the Settings menu.
2 Using <
>, select the menu item, Data transfer to USB
memory and confirm with <OK>.
3 Using < >, select the menu item, Retransfer
configuration and confirm with <OK>. The process is started.
4 Wait for the restore process to be completed.
5 Confirm the concluding message with <OK>.