YSI IQ SensorNet 2020 XT Terminal - Manual (Page 124)

Settings/setup System 2020 XT USB
5 - 4 ba76019e01 12/2012
Terminal name The name of the terminal appears in the top left corner of the display.
15 characters are available for the name.
Illumination brightness When operating the terminal the brightness of the display can be
continuously adjusted between 0 ... 100 %.
Illumination brightness
(standby)
When operating the terminal without making any entries on the keys
the brightness of the display can be continuously adjusted between 0 ...
50 %.
Display contrast The display contrast can be continuously adjusted.
Network settings
(TCP/IP settings)
These settings are used to connect the MIQ/TC 2020 XT to a TCP/IP
network.
3 Using < > and <OK>, select and confirm the menu
item, Terminal name -> .
4 Enter the terminal name with <
> and <OK> and
confirm with <OK> (see also section 4.2.2).
5 Using <
> and <OK>, select and confirm the menu
item, Illumination brightness -> .
6 Press < > and <OK> to select and confirm a brightness
level.
7 Using < > and <OK>, select and confirm the menu
item, standby Illumination brightness (standby).
8 Press <
> and <OK> to select and confirm a brightness
level.
9 Using < > and <OK>, select and confirm the menu
item, Display contrast -> .
10 Press <
> and <OK> to select and confirm a contrast
level.