YSI IQ SensorNet 2020 XT Terminal - Manual (Page 170)

What to do if ... System 2020 XT USB
7 - 10 ba76019e01 12/2012
Operating sequence in
case 2
Fig. 7-2 Add/replace sensor
Case 2:
The type of sensor is identical
with the type of sensor in an
inactive dataset (or several
inactive datasets), but the serial
numbers differ. Operator intervention is required
here. The connected IQ sensor
can:
– be assigned to the inactive
dataset (or one of the inactive
datasets).
Example: Replacing an
IQ sensor.
Make sure that the substitute
sensor has at least the
software status of the active
IQ sensor.
– be included as a new module
in the list of the sensors.
The operating sequence to do
this is described below.
1 Connect a new IQ sensor.
2 Change to the measured value display with <M>. The module
database is updated. The following display appears (example):