YSI IQ SensorNet 2020 XT Terminal - Manual (Page 127)

System 2020 XT USB Settings/setup
5 - 7 ba76019e01 12/2012
Fig. 5-3 100 - Settings -> Unlock/lock settings
Note
Forgotten the password? You can display the valid password on the
screen (see section 12.1).
Switching off the simple
access control
(open system)
Password protection is switched off as follows:
3 Press < > and <OK> to select a function and <OK> to
confirm.
The dialog window for entering the password opens.
4 Press <
> and <OK> to enter the valid password and
press <OK> to confirm. The setting is changed.
1 Using <S>, open the Settings menu.
2 Press <
> to select the menu item,System settings ->
Access control and confirm with <OK>.
3 If extended access control is activated:
Deactivate extended access control.
4 Press <
> to select the menu item, Release/lock
settings and confirm with <OK>.
5 Press < > to select the menu item, Release/lock
settings and confirm with <OK>.
All system functions can be accessed without a password.