YSI IQ SensorNet 2020 XT Terminal - Manual (Page 86)

Operation System 2020 XT USB
4 - 8 ba76019e01 12/2012
4.2.2 Entering texts or numerals
You can assign names to IQ sensors, MIQ output modules, terminals
and locations. Example: Entering a sensor name:
Fig. 4-5 Edit list of sensors
1 Using <S>, open the Settings menu.
2 Use <
> to select the menu item, Edit list of sensors.
3 Use <OK> to confirm the menu item, Edit list of sensors.
The Edit list of sensors display opens. A column is highlighted.
4 Use <
> to select the Sensor name column.
5 Use <OK> to confirm the Sensor name column.
A sensor name is highlighted.
6 Select a sensor name with < >.
7 Confirm the selection with <OK>.
The name of the selected sensor is edited.