YSI IQ SensorNet 2020 XT Terminal - Manual (Page 174)

What to do if ... System 2020 XT USB
7 - 14 ba76019e01 12/2012
Fig. 7-4 Add/replace output module
Fig. 7-5 Assign output module as a substitute
4 Select the required option with <
> and confirm with
<OK>.
– If Add new output module was selected, the system
changes directly to the measured value display.
– If Assign output module as a substitute was selected, a list
of the matching inactive datasets appears:
5 Select the required inactive dataset with < > and
confirm with <OK>. The system changes to the measured
value display. The MIQ output module takes over all settings of
the inactive dataset.