YSI IQ SensorNet 2020 XT Terminal - Manual (Page 62)

Installation System 2020 XT USB
3 - 32 ba76019e01 12/2012
3.6.3 Mounting under the SD/K 170 sun shield
If a single MIQ module is to be installed outside, it must be provided
with a sun shield that protects it against the effects of weather. The SD/
K 170 sun shield can be mounted directly on a wall, on a mounting
stand or on a railing. The MR/SD 170 mounting kit is also required for
mounting on a mounting stand or railing.
Note
How to mount the sun shield at the installation location is described in
the instructions for the sun shield or mounting kit.
4 Position the MIQ module on the sun shield and fix it into place
with the two screws (pos. 6 in Fig. 3-21).
5 Close the module lid and fix it with the two countersunk screws
(pos. 5 in Fig. 3-21).