YSI IQ SensorNet 2020 XT Terminal - Manual (Page 45)

System 2020 XT USB Installation
3 - 15 ba76019e01 12/2012
Both installation variants are described below. To dismantle a module
stack, proceed in the reverse order to mounting the stack.
Variant 1: Stack expansion forwards
Preparing the stack
mounting
Fig. 3-4 Preparing MIQ modules for stack mounting (variant 1)
Mounting the contact
base
Fig. 3-5 Mounting the contact base (variant 1)
1 Remove the covers from the drilled mounting holes (pos. 1 and
3 in Fig. 3-4).
2 Remove the contact cover (pos. 2).
3 Pull off the adhesive label (pos. 4).
For stack mounting remove label
and install contact carrier
1 3
2 4
Back Front
MIQ module MIQ module
7
5
6