YSI IQ SensorNet 2020 XT Terminal - Manual (Page 140)

Settings/setup System 2020 XT USB
5 - 20 ba76019e01 12/2012
Establishing a link
1 Using <S>, open the Settings menu.
2 Using <
><> and <OK>, select and confirm the menu item,
System settings -> Sensor-sensor link.
The Sensor-sensor link overview opens.
The displayed list includes all sensors with which the
correction of an influence quantity is possible (e.g. FDO
®
700
IQ).
3 Using < ><>, highlight a sensor and confirm with <OK>.
The influence quantity to be linked and the current state of the
link are displayed.
4 Using < ><>, highlight a parameter to be linked, and
confirm with <OK>.
The displayed list includes all sensors that measure an
influence quantity with the correct unit
(e.g. TetraCon
®
700 IQ, which measures the salinity in mg/L).