YSI IQ SensorNet 2020 XT Terminal User Manual
Page 56
Installation
System 2020 XT USB
3 - 26
ba76019e01
12/2012
Note
IQ S
ENSOR
N
ET
cables must always be installed separately at a
minimum distance of 20 cm from other lines that carry a voltage greater
than 60 V.
Connecting the sensor
to the connection cable
Fig. 3-17 Connecting the SACIQ cable with the IQ sensor
Note
For further instructions on the mounting of IQ sensors at the application
location, please see the respective manuals (immersion depths, etc.).
1
Remove the protective caps from the plug connections of the
IQ sensor and SACIQ sensor connection cable and keep them
safe.
2
Plug the socket of the SACIQ sensor connection cable onto the
plug head connector of the IQ sensor. At the same time, rotate
the socket so that the pin in the plug head connector (1) clicks
into one of the two holes in the socket.
3
Then, screw the coupling ring (2) of the IQ sensor connection
cable on the IQ sensor up to the stop.
SACIQ
1
2