YSI IQ SensorNet 2020 XT Terminal - Manual (Page 84)

Operation System 2020 XT USB
4 - 6 ba76019e01 12/2012
4.2 General operating principles
The operation of the IQ S ENSOR N ET is standardized and user-friendly.
 The arrow keys, <> are use to make a selection
– Highlight individual elements in menus, lists and tables, e.g.
menu entries, list elements, columns or fields
– Select a setting in selection fields
– Select a character in text entry fields
 The <OK> key confirms a selection.
 Break off an action and change to the next higher level with the
<ESC> key.
 Start a calibration procedure with the <C> key.
 Switch to the settings with the <S> key.
 Change to the measured value display and break off current actions
with the <M> key.
Note
Short operating instructions are given in the help line on the display.
Examples of the operating principles are given below:
 Navigation in menus, lists and tables (see chapter 4.2.1)
 Entering text and numerical values (see chapter 4.2.2)
Note
General key symbols are used for all operating steps in this operating
manual. Details and differences when using the software terminal can
be found in the MIQ/IF232 component operating manual.
Note
If two or more terminals are used in a IQ S
ENSOR N ET access to the
functions <C> and <S> is blocked if the functions are already being
used at another terminal.