YSI IQ SensorNet 2020 XT Terminal - Manual (Page 149)

System 2020 XT USB Settings/setup
5 - 29 ba76019e01 12/2012
5.10.2 Setting up / editing alarms
Fig. 5-15 Alarm settings -> Alarm link overview
Note
In the Sensor column, the sensor number (corresponding to the list of
sensors) and series number is named.
1 Using <S>, open the Settings menu.
2 Using < > and <OK>, select and confirm the menu
item, Alarm settings -> .
The Alarm link overview dialog window opens.
Alarms that have already been set up have entries in the
Sensor column.
3 Select an alarm A01 to A20 to be edited with < >. To
set up a new alarm without entry select in the Sensor column.
Then confirm with <OK>. When a new alarm is set up a list with
all sensors appears first.
Alarm links that are already available can be erased or edited
(for editing continue with step 5).